Industrial Lubricants
Airlube
AIRLUBE is a high quality rock-drill lubricant specially formulated for pneumatic tools of the oil-lubricant type. It contains extreme pressure, anti-rust, anti-corrosion and adhesive additives.
Gearfluid 2K
GEARFLUID 2K is a solvent cutback, asphalt- based, adhesive-type gear lubricant compounded with additives to impart extreme pressure, anti-rust and anti- corrosion characteristics. Gearfluid 2K contains a non-flammable solvent to allow application without heating. After application, the solvent evaporates, leaving a lubricating film that strongly adheres to the moving surfaces.
Gearkote
GEARKOTE is a highly viscous asphalt-based gear lubricant enhanced with extreme pressure (EP) additive.
Greasolve
GREASOLVE is a sprayable product that provides a quick, easy way to remove grease and oil film from engines, motorcycles and motors. It is also excellent for cleaning driveways, garage floors and lube bays.
Hydrotur AW
HYDROTUR AW is a hydraulic system oil with demonstrated “Universal” performance to meet severe requirements of hydraulic systems.
Hydrotur AWX
HYDROTUR AWX is a special performance hydraulic lubricant recommended for extremely severe load conditions that lead to viscosity fluctuations caused by operating temperature changes systems.
Hydrotur N 100
HYDROTUR N 100 is a versatile compressor oil manufactured from naphthenic base stocks and additives to control carbon deposition and rusting; provide additional oxidation stability, inhibit foaming, and exhibit excellent demulsibility.
Hydrotur R
HYDROTUR R is a multi-purpose, circulating oil that contains a highly effective rust and oxidation (R&O) additive.
Hydrotur SX 68
HYDROTUR SX 68 is an ester-based synthetic lubricating oil formulated from highest quality ester base stock combined with advanced technology additives to provide high thermal and oxidative stability, low volatility and good rust and corrosion protection.
Hydrotur SX 220
HYDROTUR SX 220 is a high performance synthetic lubricating oil based on PAO and polyol ester. It is intended for the lubrication of heavy loaded industrial gearboxes as well as plain and rolling bearings. It is also recommended for gears working at high temperature, when mineral base oils cannot withstand severe oxidation conditions. Hydrotur SX 220 contains anti-oxidant, anti- rust and anti-wear additives which improve its properties particularly as a lubricant under high loads.
Hydrotur T
HYDROTUR T is a versatile, circulating oil manufactured from highly refined base oils of turbine grade quality and additives that control rusting, provide additional oxidation stability, inhibit foaming, and exhibit excellent demulsibility.
Hypex EP
HYPEX EP is a premium quality, general purpose, lead-free gear and bearing lubricant designed for continuous use at operating temperatures of up to 100°C.
Milrol 5K
MILROL 5K is black, highly viscous industrial gear oil specially formulated to prolong the life of sugar mill roll brass and crown gears.
Molygrease EP2
MOLYGREASE EP 2 is a premium lithium-type grease with extreme pressure characteristics enhanced by the presence of molybdenum disulfide additive.
Petrocyl S
PETROCYL S is a compounded general gear and bearing oil suitable for high load applications of industrial gear boxes, worm gear drives and plain and anti-friction bearings made of yellow metal that do not require an EP lubricant. It is originally designed as a high quality steam cylinder oil.
Petrogrease EP
PETROGREASE EP is a premium quality, lithium-type grease containing an extreme pressure agent and oxidation and rust inhibitors.
Petrogrease HT
PETROGREASE HT is a bentonite-thickened, non-melt type grease with colloidal graphite exhibiting superior resistance to high temperature.
PetrokutT 10
PETROKUT 10 is a low viscosity cutting oil containing a special blend of additives and anti-oxidant to provide oxidation stability and extended oil service life. It is designed for use in deep-hole boring and threading operations where cutting fluid transparency is needed for good metalworking visibility. It also exhibits non-staining characteristics, giving a high degree of surface finish.
Petromar 65
PETROMAR 65 is a low-detergent system oil commonly used as crosshead engine crankcase oil and in low and intermediate speed engines running under mild service conditions.
Petromar DCL 7050
Petromar DCL 7050 is a 67-BN (Base Number) premium diesel cylinder oil specially designed to minimize corrosive wear in turbocharged engines burning high sulfur fuel under severe operating conditions.
Petromar XC 1000 SERIES
PETROMAR XC 1000 is a 12 BN (base number) heavy-duty oil especially designed for the lubrication of high and medium speed trunk piston engines using diesel fuel. Petromar XC can sustain its excellent anti- wear properties and viscosity control while maintaining superior engine cleanliness despite the occurrence of fuel dilution.
Petromar XC 2000 SERIES
Petromar XC 2000 SERIES is a 20 BN (base number) oil especially designed for the lubrication of new generation and highly rated trunk piston diesel engines in severe service burning residual fuels. Petromar XC oils are formulated to tolerate contamination with residual fuel, as experienced in some installations, without deterioration of its excellent anti-wear properties and viscosity control while maintaining superior engine cleanliness.
Petromar XC 3000 SERIES
Petromar XC 3000 SERIES is a 30 BN (base number) oil especially designed for the lubrication of new generation and highly rated trunk piston diesel engines in severe service burning residual fuels. Petromar XC oils are formulated to tolerate contamination with residual fuel, as experienced in some installations, without deterioration of its excellent anti-wear properties and viscosity control while maintaining superior engine cleanliness.
Petromar XC 4040
Petromar XC 4040 is a 40 BN (base number), SAE 40 oil especially designed for the lubrication of new generation and highly rated trunk piston diesel engines in severe service burning residual fuels. Petromar XC oils are capable of accommodating residual fuel dilution, as experienced in some installations, without deterioration of its excellent anti-wear properties and viscosity control while maintaining superior engine cleanliness.
Petrosine 68
PETROSINE 68 is a high quality recommended for wet air filters.
Petrotherm 32
PETROTHERM 32 is a petroleum-based heat transfer fluid, which is highly resistant to oxidation and thermal decomposition. Due to its low volatility and high resistance to changes in viscosity at varying temperatures, it is recommended for service involving maximum film temperature up to 360°C (680°F).
Spinol 10E
SPINOL 10E is an emulsifiable lubricant intended for high-speed machine elements in the textile industry such as twister spindles and spinning rings.
Spinol 15
SPINOL 15 is a premium quality lubricant for high-speed machine elements in the textile industry such as twister spindles and spinning rings.
Turnol 40
TURNOL is a premium quality, general purpose, emulsifiable oil, which provides optimum cooling and lubrication in metal cutting and grinding operations.
Voltran 60
VOLTRAN is a highly refined, petroleum- based coolant and insulating oil for electrical equipment like transformers and electrical circuit breakers that meets the quality requirements of the largest transformer and circuit breaker manufacturers in the world.
Zerflo 68
ZERFLO 68 is a high quality lubricant with very low pour point and natural oxidation resistance suitable for the lubrication of refrigeration equipment.
Project Details
- Name : Project 4
- Place : Paris
- Architect : Daniel Craig